Competent person in accordance with the German Industrial Safety Ordinance (BetrSichV) and DGUV Rule 113-020 + practical day
Hydraulic hose assemblies and hydraulic fluids – rules for safe use
Benefits of the training: Compliance with legal requirements when handling hydraulic hose assemblies and hydraulic fluids. Familiarity with the most important standards, guidelines and requirements of the employers’ liability insurance associations. Early detection of faults, prevention of consequential damage and avoidance of machine downtime. Possibility of being appointed as a competent person by the employer.
Potential participants: Persons who, within the meaning of the German Industrial Safety Ordinance (BetrSichV) and DGUV Rule 113-020, are to act as a competent person for the inspection of hydraulic hose assemblies.
Objectives include preventive maintenance, regular inspections, accident prevention during inspections, and the qualification to identify and remedy faults.
Contents of the hydraulic training “Competent person in accordance with BetrSichV and DGUV Rule 113-020”:
- Basic knowledge and the significance of the relevant regulations: BetrSichV, DIN EN ISO 4413, DIN 20066, DGUV Rule 113-020
- Hose selection, storage and service life, ideal storage conditions
- Selection criteria for fittings, assembly of a hose assembly
- Labelling requirement, labelling of hoses and hose assemblies
- Assembly methods
- System contamination, possible causes and effects
- Correct routing of a hose assembly
- Preparation of inspection documentation in accordance with BetrSichV, TRBS and DGUV Rule 113-020
Seminar completion:
“Competent person in accordance with BetrSichV and DGUV Rule 113-020”.
After successfully passing the test, the participant may be appointed by their employer as a competent person in accordance with DGUV Rule 113-020.
The additional practical day is intended to deepen the knowledge acquired and implement it directly in practical exercises.
Target group:
Maintenance personnel, occupational safety specialists, safety engineers, fitters, hydraulic service providers and planners, as well as internal and field service staff with direct relevance to the topic.
Training duration: 2 days
Times: Day 1 09:00–17:00 / Day 2 08:00–16:00
Fee per participant:
€980.00 plus VAT
Including materials and catering